ZCar Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
i have a 77 280z, i was driving the other day and i put my turn signal on and some smoke started coming out of the steering column. when i tried to turn the signal off it would stay on a blink really slow. it shut of buyt then when i went to turn it on again it would not come on. the hazards work but the blinkers dont come inside or outside please help email me directly thanks oj
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #2 ·
<b>RE: help blinkers wont work</b>

first check your fuse. it's probably blown. that's why they won't work. the hazzards are on a seperate circuit, so they have nothing to do with it. if the fuse is blown your turn signal switch most likely shorted out. take it apart and look for burnt contacts. i think this could be the problem.
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #3 ·
where is trhe turn signal switch located. it is simple that part that is in the steering colmn or is it else where.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top