ZCar Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter #1
First off My heater doesn't work, the air conditioner was worked on a while back and a new compressor core was put in and it works real good now.. but the heater has quit working since then. What could make it stop working... do they do something to the system while they're working on it that wouldn't make the heater work?

Second, I was wondering where, and what kind of paint I should get to repaint some things on my car... I'm talking a professional job.. I already have a good sprayer. I needt to sand and repaint the metal part on the t- tops because the paint in bubbling. I sprayed ospho on just about everything to kill the rust and now need to sand, bondo, weld and paint. well thanks for your help...
--Casey 280zx
 

·
Registered
Joined
·
16 Posts
> First off My heater doesn't work, the air
> conditioner was worked on a while back and a
> new compressor core was put in and it works
> real good now.. but the heater has quit
> working since then. What could make it stop
> working... do they do something to the
> system while they're working on it that
> wouldn't make the heater work?

If the fan operates but there's no heat it may be a vacuum leak. Check all your vacuum hoses.
This happens on my 260 from time to time, and it's just a matter of finding the leak.

Don't know about paint, I leave that up to the guys at the body shop.

Good luck.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top