ZCar Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
972 Posts
Do the wires go into the loom? If you follow the wires and they head back near the gas pedal it might be your automatic transmission kick-down switch.

Buy ya, I second Pilgrim, the wiring diagram will give you the definitive answer because theres no real reason for us to guess back and forth.
 

·
Registered
Joined
·
352 Posts
Mr.turner:

Well, acknowledging that I don't know ZXs, I will note that on the 280Z, there is, around those parts, the F.I./F.Pump relay that has two plugs, one green, one white.

This may not apply in your case, but it might be a starting point for a Wiring Diagram search.

Also, the FSM will likely indicate the general locations of wiring components.

Both references are invaluable if one is going to muckle about with a car.

$.02 from the cheap seats.
 

·
Registered
Joined
·
24 Posts
OK, I have an 81 ZXT and happen to be in the process of changing my interior color AND getting set to rid mine of that Automatic gearbox. So Here is a pic and I have a white plug with green and black wires hanging out by the ECU. Mine is not plugged into anything.

107604
 

·
Registered
Joined
·
664 Posts
That's a NO CONNECTION. Nissan just put that there to confuse everyone.
(seriously, it shows in the electrical diagram, it's on every ECCS engine harness, may be a factory test connector, but for the end-user doesn't connect to anything...)
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top