ZCar Forum banner

Status
Not open for further replies.
1 - 12 of 12 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
im planing on installing a tt motor out of a Z32 into my 84na. I've found a shop to fit the motor for me but im wondering will my 5spd gearbox fit onto the new motor as they are both a VG30 block.
any help would be great.
 

·
Registered
Joined
·
1,593 Posts
Yes you will need the whole z32 drivetrain.
 

·
Registered
Joined
·
1,454 Posts
agreed and good luck and no offense but when you get half way threw the project and you realized youve been to far to turn back let us know how it goes, maybe it will work for you but the odds are against you

so good luck and may the force be with you
 

·
Registered
Joined
·
43 Posts
Yes your Trans will fit. I too have a TT motor going in my 85 NA but I havent built up the motor yet. anyway I had a spare trans for the 85 and i matched it up to the vg30dett block and it fits. just need to remove some brackets from the TT block. The shaft from the 85 fits perfect inside the crank of the vg30dett. You reallly dont need the trans but the trans that comes on the vg30dett is the best trans out of the three of them. good luck
 

·
Registered
Joined
·
248 Posts
none of you are going to succesfully do this, i guarantee
 

·
Registered
Joined
·
29 Posts
daaaaaaamn....you go dude.
my intentions as well,next summer.
piece by piece.
 

·
Registered
Joined
·
354 Posts
Just keep in mind what the 84-89 transmisisons are built to handle, and what your new TT motor is going to put out

a complete drivetrain would be the way to go here

again good luck
 
1 - 12 of 12 Posts
Status
Not open for further replies.
Top