ZCar Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
656 Posts
Discussion Starter #1
Hey everyone,two of my injectors on my 280zxt have gone bad so I figure now would be a good time to upgrade them all. My question is what size (cc's) would I use and are there any available from other cars that I can use? Please let me know of any injectors you are using and what you did to make them fit and work. Thanks.
John
 

·
Registered
Joined
·
1,784 Posts
Unless you are going to add lots more boost and in intercooler (you didn't say where you were going with this..), your best bet is to stick with stock injectors. The stock injectors are good to 10-12 psi boost with an intercooler. Some folks have had luck with the Mustang SVO brown-top injector (370 cc/min, stock is 260 cc/min). It's not too hard to modify them to fit the stock fuel rail, and you can adjust the AFM to get the car running right again.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top