ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1,608 Posts
Attack of Corrosion Monster

Dave,
Pull the connectors off your thermotine switch and engine temperature sensor. Clean them very thoroughly by physically scaping them clean, tighten the connectors back up, put dielectric grease on them and reinstall. Then pull your plugs and thoroughly dry and clean them. They are probably horribly gas fouled by now. See if that helps.
Good Luck,
Phantom
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top