ZCar Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
672 Posts
Discussion Starter #1
I have been driving my Z forever without a fuel Door attached...the spring pin broke off and wouldn't stay closed so I took the complete door off

What I was planing to do was install one of these cam locks drill a hole in the
gas cover then go from there.

has anyone had any experience doing something like that
 

Attachments

·
Registered
Joined
·
1,412 Posts
I used an old mouse trap spring. Cut and modified it to fit in with the hinge for the fuel door. I keeps pressure on the door so when you release the lock it pops out enough. I'll go take a picture after a little while and post it. I wouldn't do the cam style because its just plain ugly to me.
 

·
Registered
Joined
·
672 Posts
Discussion Starter #5
The cam style would look a bit odd and probably stand out...maybe with a little paint it would look ok....I just know its a pain the butt to try to fix the standard locking assembly..I will rethink my options
 
1 - 5 of 5 Posts
Top