ZCar Forum banner

Status
Not open for further replies.
1 - 9 of 9 Posts

·
Registered
Joined
·
1,339 Posts
Discussion Starter #1
They slide over the velocity stack and clamp on with a hose clamp. Anyone know where to get them, and are they cheap?

Thanks.
 

·
Registered
Joined
·
79 Posts
The ones on my car were from a motorcycle shop (dirt bike in particular)

that is where they are form i believe as for price don't know prolly pretty cheap... however you have to get PJ1 heavy foam filter oil. it sprays red, and is about as thick as maple syrup but anything less will get sucked right out of them

http://www.geocities.com/ebola0001/240z/240z.html

hope this helps
 

·
Premium Member
Joined
·
40,978 Posts
Beware!

They could restrict the airflow, causing you to run lean and BLOW your headgasket! ;-p

Did you have to read it to know what it said, Gearhead?
 

·
Premium Member
Joined
·
40,978 Posts
Re: Ah, Tony D, but...

Yes, restricting the airflow would cause it to be rich. Indeed you are correct. So rich, as to say the fuel may pool, and run down the intake as a solid mass of liquid. This would cause hydrolocking, and resultant head-gasket (if not head completely bloweth off!) blowage! Never mess with the master...

I saw a Ford truck hydrolock at about 4500 when he went under water. It was really funny to watch his face as a BIG dent popped into the left side of the hood almost instantaneously with the BOOM of the motor going away. The dent was caused when the head bolts broke, and the head blew off, hitting the hood! 1978 Ford F250 4X4. After that he didn't seem so keen at taking "cross the river here" challenges without putting a stick in to check for deep holes...
We all thought it was hilarious..
 

·
Premium Member
Joined
·
40,978 Posts
Hey Gearhead!

What's wrong with the "socks" you have now?

I think Ebola's correct, tho---Motorcycle shops should have them. Something for a 500CC single-cylinder bike should work fine, as that's the equivalent of a 3-liter six...

Hey, dig FlameZZZ and his rantings and name calling on the posts above on four barrels and carb conversions on 280's. Some people have waaay to much sensitivity about some things...
 

·
Registered
Joined
·
1,339 Posts
Discussion Starter #8
Tony D

Master or not, I have to keep you on your toes, and I must say that your creativity never ends.
 

·
Premium Member
Joined
·
40,978 Posts
Oh, here it is!

I looked and looked and LOOKED earlier today and could not find this post ! Now that I've imbibed and desecrated the temple that is my bloated body, I find it!
Next thing you know, I'll be going Vegan...
See you Thursday, dude! Hopefully in the Fairlady!
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top