ZCar Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter #1
Have anyone tried the floor pans from motorsport? Are they anydifferentt than the one that are listed at zedfindings? If you have used them which one would you buy if you needed to do it all over again? I would like to thank you for your advice in advance. p.s. I am putting a 1972 240z together and I will be purchasing some floorpans within the next couple of days so that I can pu them in over the holidays. thanks again fellow zer's
 

·
Registered
Joined
·
1,097 Posts
there isnt difference between the zedd floor pans and the ones from motorsport.. the expensive ones in motorsport are the zedd ones.. the cheaper ones are from auto rust doctors in rhode island.. cranston.. charlies the owner.. he wont give you a better price than motorsport i tried.. i bought the cheap ones form motorsport and brought them to a bodyshop and they were very impressed with the quality of the pans.. the thickness was a good deal thicker than the stock pans and they didnt have to cut or bend or bang them into shape at all.. i should have done it myself. it took them 2 days but that was with some fabrication also.. they look good inside and out and are very sturdy.. they were seam sealed from the inside and have yet to be undercoated.. i am not driving the car yet its not done.. my opinion go with the cheap ones..email me any further questions if you want
 

·
Registered
Joined
·
43 Posts
Discussion Starter #3
I guess it wasn't much to putting them in the car. I have been thinking on purchasing a mig welder and do the work myself , along with one of my buddies, well I guess I should say he will be doing the work and I will be more like the little errand boy, err (supervisor) . MAKING SURE THAT EVERYTHING IS DONE APPROPRIATELY, OF COURSE. How long did it take the pans to come? Hopefully it won't take them that long to get to my area. Thanks for the info.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top