ZCar Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter #1 (Edited)
2007 6 speed CD-009
Looking for a part number and supplier for replacement electrical connectors and wire pigtail for switches on 6-speed CD-009 transmission. I have both switches, but I need the matching connector and wire pigtail for the Reverse Safety Switch on left (driver's) side AND the Neutral Safety Switch on the right (passenger) side. Any suggestions for a new or used part supplier?
 

·
Registered
Joined
·
5,202 Posts
Got any pictures of what you have.
The size of the pins or sockets will offer a direction to check.
If you have the time try www.mouser.com or www.digikey.com and check their connectors section (will need pins or sockets to go with the connectors) under "automotive". You'll have to drill down thru the number of "holes" with their table of filters, etc to narrow it down.

or try www.courtesyparts.com (nissan dealer).
 

·
Registered
Joined
·
5,202 Posts
This type of Yazaki connector may be similar to what your seeking.
http://connectors-catalog.sys.yzk.co.jp/yazaki-web/servlet/SubServlet_e?forward=7223-6526-30&plist=list&select=15

Yazaki seems to be the main source of Nissan connectors.
This is just one of LOTS of connector types.
If you have some dimensions on your connector housing that measure to the pictures you might narrow down the one you need.
Another one that appears to have the 4 side ears:
http://connectors-catalog.sys.yzk.co.jp/yazaki-web/servlet/SubServlet_e?forward=7223-6526-30&plist=list&select=15

Odds are you can find a Yazaki to fit but it will take a lot of searching thru their catalog by rote.
When you go to page for a particular class or style of connector there may be sub-styles summarized by paragraph description and a photo.........you can click on each style and bring up a list of those particular fittings, then click the part # to see what it looks like. They use the word "Print" to bring up the list.....part nos. are in blue to the right of the chart.

Measure your connectors to be able to compare to the dimension and usable pins and sockets for a particular connector..............And you may be able to see a part no. on your housing.

Then you have to source it. Some sites will sell singly, some only in bulk or by minimum total order.

Good luck.
 

·
Registered
Joined
·
5,202 Posts
Last year I found a site that sold connectors, if available, by each. Haven't found it again so far.
One possibility is....
http://www.smdinc.com/yazaki.php

They are a supply house but do say for low volume orders to contact SMD.

Worth a try.

And you will need the seals and female connectors to go with it.
 
1 - 6 of 6 Posts
Top