ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
4,034 Posts
you could have set the oil pump shaft for #6 compression.(It looks just as same as #1 TDC) set the distributor to #1 position (rotor botton facing 11 o'clock) and take the valve cover off. You should have the #1 intake closed( facing up). If not, put #1 wire in the #6 distributor cap and replace the rest from the in order
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top