ZCar Forum banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
91 Posts
Discussion Starter #1
OK. I did do a search and found nothing.

Here goes;

When I accelerate the turbo starts to spool. At about 2500 rpm it starts to boost. When it gets to (appox) 25% of boost it starts cutting out, and then back to boost, and then cuts out and so on.

What could cause this?
 

·
Registered
Joined
·
91 Posts
Discussion Starter #5
All of it is new...it sat for about 5 yrs.....
cap, rotor, plugs,wires,fuel filter, air filter, AFM, Injectors and belts.
 

·
Registered
Joined
·
91 Posts
Discussion Starter #6
No 88, the engine is not cutting out. I'm thinking that maybe because it sat for so long, the new fuek pump may have sucked some crap from the tank. Thus, lowering the fuel pressure for a second, starving the motor. This would be amplified during boost. At least i think that's what it is. The tank is all that is not new in the system.

I am going to drop the tank and flush the fuel system tonight...I'll let you know how it goes.

thanks.
 

·
Registered
Joined
·
91 Posts
Discussion Starter #7
ok....
it's the POV. Plugged it. all is fine now.

thanks for the help.
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top