ZCar Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter #1
I have got the engine put together now (pics in the link below) and am starting to get the electronics figured out now. I have replaced the oil temp sens. , the boost sens., oil pressure sens., and removed the emissions controllers. I am wondering if taking off these sensors and hard wiring the new sensors into there gauges will affect any engine performance by initiating a "fail-safe" type mode. I also want to know if removing the boost sensor will cause any problems, as well as the emissions controls, the (secondary purge canister) located nere the coil ties into the intake piping near the MAF sensor, and the 2 (sensors or Vac solenoids) mounted just above the coil. I understand this might issue a service light and set codes but these things do not concern me.

http://groups.msn.com/NissanZ31/shoebox.msnw



Post Edited (Aug 2, 10:56pm)
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top