ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
I dont have all the answers yet but I think I might have a cheap alternative for a 450cc injector. I took notice of how similiar the Bosch and RCI upgraded injectors are to the stock DSM 2.0L turbo injector and starting doing some checking and here is what I know so far.

The DSM injector is from the 90-94 Talon/Eclise/Laser Turbo. It is 450cc and has an impedance of 2-3 ohms, so although it flows a lot, it should give a good idle. It is physically the same as the hi-perf injectors, both o-rings fit and the wire connector is the same. Only difference is that the inlet o.d. is slighter larger and has an o-ring. I believe with a little elbow grease, the hose would slip on.

I already have 6 lined from my DSM crowd, but I have a lot more brakes and suspension work to do so this is a future mod for me. Someone else might want to try it. You should be able to get a used set cheap.

Scottie
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top