ZCar Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
So I'm having an issue with my cas sensor.
When I spin it by hand with the ignition on I have spark and my injectors click but when I install it into the engine and crank it there is no spark and the injectors don't fire.
I'm installing it the right way with the half moon key and rotating the shaft 360 before install. Could this just be a bad CAS or something else?
 

·
Registered
Joined
·
285 Posts
Only thing I can suggest is to look inside the cam shaft hole and make sure the half moon key is not broken off.
 
1 - 2 of 2 Posts
Top