ZCar Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
482 Posts
Discussion Starter · #1 ·
Anyone have a cam manufacturer preference??
Why would you recommend/not recommend this manufacturer?

Thanks for any input.
 

·
Registered
Joined
·
107,695 Posts
> Anyone have a cam manufacturer preference??
> Why would you recommend/not recommend this
> manufacturer?

> Thanks for any input.
You need to provide more information, i.e., L24, L28, E-31, E-88, SU's, Webers, FI, Street, Drag, Autocross, etc.
I have an L28/E-88, 3x40DCOE Webbers, Crane HI-6, 280Z Distributor and I used a Schneider Cam with .480 Valve lift, 274 duration which seems to work pretty well.
 

·
Registered
Joined
·
85 Posts
> You need to provide more information, i.e.,
> L24, L28, E-31, E-88, SU's, Webers, FI,
> Street, Drag, Autocross, etc.
> I have an L28/E-88, 3x40DCOE Webbers, Crane
> HI-6, 280Z Distributor and I used a
> Schneider Cam with .480 Valve lift,
> 274 duration which seems to work pretty
> well.

Yeah, and Turbo Cams are a completely different ball game.....
 

·
Registered
Joined
·
482 Posts
Discussion Starter · #4 ·
Interested in quality of parts rather than specs.

I'm not really interested in specs, I know they vary greatly for all the different configurations.

I'm mainly interested in the quality/price of the manufacturer. For exapmle, I've heard some people complain that Crane Cams have premature lobe wear and such. I would like to hear about some other experiences with other manufacturers, whether good or bad.
 

·
Registered
Joined
·
107,695 Posts
Bob i have already asked Dave this question but when i change my cam i will have a similar set up to yours and i was wandering what sort of horsepower you have.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top