ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1,067 Posts
I agree with John. Be carefull with the heat and tapping cuz the alum
drums can warp or crack if you pound on them too hard while heated . Have patience
Once you start to see the drum move away no more heat.
All that white powdery alum oxidation buildup.
To prevent the problem from happening again; I cleaned the hub with a wire
brush then very lightly coated the hub surface with high temp grease.I also
coat the stud threads to prevent frozen lug nuts.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top