ZCar Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
250 Posts
Discussion Starter #1
can somebody tell me how to make a boost controoler from a couple valves like you would find at lowes or the home depot? i bought a valve and a T fitting but when i put the t in and put the valve on the bottom of the t i cant get it to bleed off enough to up the boost, i have modified me pop off valve. if i take the valve completely off it will raise to 9psi boost but no more. also i have tried putting the valve in line with the hose that goes to the waste gate but it seems very sensitive for example at 1/2 a turn open it will provide no increase in boost and closed it will boost 10psi+ (i let off the gas) and this is not a open/close type valve you have to turn it 15-20 times to fully open or close it. any help would be great.
blake
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top