ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter · #1 ·
My manual calls for a toe of 0-3mm toe in. I have heard of going to 1/8 toe out for a salolom car to improve handling. Is there any experience out there with the best setup?
 

·
Registered
Joined
·
107,695 Posts
> My manual calls for a toe of 0-3mm toe in. I
> have heard of going to 1/8 toe out for
> a salolom car to improve handling. Is there
> any experience out there with the best
> setup?
I run 1/16 tou-out to improve turn-in, and about -1 degree chamber, the most I can get with the eccentric control arm bushings. Some autox'rs I know run as much as 1/4 tow-out and -3 to -4 degrees chanber.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top