ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
Here is the response from Top-End about putting in 2mm oversized intake and 3mm oversized SS valves.

It is not a problem because the P90 head is so deep that the valves do not come out of the chamber with an under .500 lift cam profile. We do it all the time.

Steve
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top