ZCar Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
Im interested in buying a roll bar or a cage. Preferably bolt in. Has anyone purchased one before, and what would be a good one to go for.

Thanks
 

·
Registered
Joined
·
3,550 Posts
RE: Roll Bars and cages

Yes I got the Autopower roll bar from Mororsport. It's a bolt in, real easy. Hardest thing will be getting the interior panels out of the way. Set the roll bar in place, give it a jiggle and start drilling holes. It practically positions itself, and does stiffen up the rear of the car. I noticed a difference in the handling characteristics in my '82 after I did it. I also have the Simpson harnesses to make sure me and my passenger stay under the roll bar should I fail to keep the shinny side up!

Ken
 

·
Registered
Joined
·
1,633 Posts
RE: Roll Bars and cages

I also have the autopower 4 point that was then converted to a full cage by a race fabricator in Va. I would recommend that you have the backing plates welded to the frame rails.... Much noticed difference in front stiffness...
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top