ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
Selling N-42. 13K miles on valve job/ extreme port-n-polish, new guides, hardened seats, SS valves.
shaved .060" with 41.8cc chambers
SS valves were $150
Port Job was $400
Valve Job/ seats and valve guides were $250
Head will not have springs/retainers/cam towers/cam
Head was pressure tested and is not leaking

hairline cracks in waterjacket holes and between the valves on #2 cylinder. I went to machine shop and they said it can easily be fixed.
I will fix the head before selling or you can buy as is.
Assume head for N/A motor with dished pistons or used on turbo block for turbo motor.
Make offer if interested, compression too high for my turbo motor(9.7:1 with flattop pistons and 2mm HKS head gasket.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top