ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
I need to get a new downpipe for my 83 ZXT. i was wondering where can i get one and is one better then the others or what. How much would one cost and what is the best diameter to go with?
Thank u for your help.

Adam
 

·
Registered
Joined
·
74 Posts
RE: Downpipe

you could make your own... all you need is to get a 2 1/2
inch mandrel bent U shape pipe and some 1/4 inch steel plate. Take the stock down pipe and trace the shape and the bolt holes on to the 1/4 inch steel and cut it out(also dont forget about the opening for the exauhst). Then just cut the U pipe in half so that you have the correct downward angle for your down pipe. Then just weld the downpipe to the plate steel...now just bolt is up..you have a custome downpipe all for about 20 - 30 dollars.

Lloyd "Ewan" Tillman
Happy Z-ing
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top