ZCar Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
OK
ive decided on 81-83zxTurbo injectors. I found a TWM oversized throttle body today and was wondering if air flow sensor was OK for more flow. Also parts clerk claimed Turbo injectors would not work with my N/A '76 electronic control unit?
Have recieved lots of advise that my ECU would work fine.
ANY ADVISE !! THANX
 

·
Registered
Joined
·
1,770 Posts
RE: Big bore throttle body...?

I can only say that I have seen people with the ZXT injectors and they claim they work. I didn't hear the cars run though. As for your AFM, it tops out on air flow at about 1/3 - 1/2 throttle. There is a modification that you can read about at my website.
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #3 ·
<b>bigger injectors???????</b>

common mistake, just adden bigger injectors and stuffing more fuel is not the answer.all zx fuel injections will automatically adjust for an increased air flow, ofcourse it depends on how much, if you are going the turbo rout, then bigger injectors may be needed. if you are adding the big bore throttal body, headers, exaust,cam then stock injectors will be best. give
JIM WOLF TECH a call they are the premier fuel injection experts for the z.619-442-0680
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top