ZCar Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
5,363 Posts
Discussion Starter #1
Is there any way to like, put the hubs and brakes and all from my 86 300ZX turbo onto my 280ZX? That way I can put some nice 5 lug wheels on my Z rather than searching for 4 lug wheels. If there's a way lemme know please. Thanks
 

·
Registered
Joined
·
1,047 Posts
i think u can change out the spindles in the rear end, with the 300zx ones to have a 5 lug, i belive u can change the front too, but i'm not sure about that. i think the 280zx and the 300zx basicly have the same rear in them any way?
 

·
Registered
Joined
·
5,716 Posts
There are also 4 to 5-lug adaptors available. Check the archives for sources. I have no experience personally with these, but I've read several complaints on the forum here that they sometime induce a vibration in front ends that's impossible to get rid of.
 

·
Registered
Joined
·
887 Posts
contact a local machine shop and ask them what it would cost to re drill the stock rotors and hubs,then theres no guess work.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top