ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1,826 Posts
Discussion Starter · #1 ·
I'm currently rebuilding the front end on my 71 240z. All the bushings on the car are the solid aluminum/delrin type. The t/c rod bushings are also the adjustable type with the threaded sleeve. Are you supposed to use a different t/c rod with these bushings? I can get the suspension together, but just barely. There is no adjustment left in the sleeves after assembling everything. It looks like the rod needs to be an inch or three longer to have room. I might end up trashing all the bushings and replacing them with poly, but since there are already there I'll use them for now. Any advice on adjustment of the sleeves? It might be my imagination, but I thought I read somewhere that you are supposed to use Subaru t/c rods?
greg
71 240z
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top