ZCar Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
78 Posts
Discussion Starter #1
My clutch is slipping (280z), and I'm wondering if there is any adjustment for this? Or am I off to the parts store? Thanks!!!
 
G

·
Guest
Joined
·
0 Posts
The only adjustment that I am aware of is on the clutch pedal but that is to adjust for proper end play. If your clutch is slipping you might want to start pricing a new clutch. Good luck. John.
 

·
Registered
Joined
·
1,410 Posts
how does that 28L fit under the hood. and I thought that the 2.8L was tight.
 

·
Registered
Joined
·
3,207 Posts
Hi Fstgreg.
Adjusting your clutch is easy. 5minuites at tops....thats after you jack the front up and secure with jackstands at the front of your framerails. (1) Find your Slave Cylinder on the passengers side of the tranny. Can't find it???? Then follow your clutch line from engine to the tranny. Okay, adjust the pivot bolt outward 4 or 5 turns at the Slave. Thats it. Have fun. shane-
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top