ZCar Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
124 Posts
Discussion Starter #1
Cranks but no start No codes got fuel got spark. Any help?
 

·
Registered
Joined
·
104 Posts
pull the plugs see if they smell like gas, determine how strong the spark is it may look like it hitting but get a cheap gauge from autozone to tell the strength of the spark next go to the crank sensor unplug it and plug it back up you may get lucky just go through step by step by step good luck
 

·
Registered
Joined
·
4,105 Posts
hello ok pull the plug from the air flow meter and see if it starts up right

now, if it starts up and engine revs to 2000rpm only, diagnosis says its a fukd air flow meter.
 

·
Registered
Joined
·
4,105 Posts
itll be easier to give information to help with problems if more details are given.. i was driving and then the car surged and then the car stopped and would not start... i woke up in the morning got in my car and engine wouldnt start

well you het the jist of what im saying
 

·
Registered
Joined
·
124 Posts
Discussion Starter #5
I found the problem the timing belt sliped.
 

·
Registered
Joined
·
297 Posts
congrats, that's good that you figured it out. i've heard of slipping timing belts damaging valve guides and other things; you should thoroughly inspect your heads
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top