ZCar Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Does anyone know where you can get a performance exhaust system that fits the turbo 2+2. Motosports Auto, nor Victoria British offer an exhaust system to fit the ZX turbo 2+2. They have one to fit the non-turbo or the coupe but not both. Any ideas on what might work.

thanks,
 

·
Registered
Joined
·
268 Posts
Mark,
You may want to write to Jeffp....He is on this board...He may be able to help you.

Good luck
 

·
Registered
Joined
·
996 Posts
As with all things automotive, it depends on your wallet weight.

As mr280zxt posted, Jeff was working on an really nice 3" stainless system including downpipe. The system, though costly, was arguably the best a person could get, certainly beyond the needs of many of us.
Lesser options are: new 2 1/2" exhaust with hiflow muffler (I have a Dynomax and love it), a 3" system with similar muffler or for more money, you can contact Jeff or Scottie for a custom 3" stainless downpipe to go with the rest of the exhaust system.
As far as I know, there are no production headers around for turbo Z's so its strictly a manifold back deal.
Dan
 

·
Registered
Joined
·
274 Posts
I don't have a 2+2, but I had a complete 3" Mandrel-bent stainless exhaust installed on mine, utilizing 3" cat and 3" straight-thru DynoMax Ultraflow oval can installed on my '83 for about $600 total here in the Atlanta area by Grand's Muffler shop. The can JUST fits in the area the regular muffler resides in (it's BIG!).

This system is both quiet AND powerful - at idle it sounds great and doesn't get much louder.

Used stock downpipe from turbo and they welded up an end/connector to the 3" to the cat.

Had a 2.5" Flowmaster on that I HATED - too loud at all times (and hollow). New system is extremely authoritative - sounds better than a Viper at idle - My neighbor has one and this pisses him off!
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top