ZCar Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
I posted earlier about having a fusible link problem, but the only reason the link burned was because I hooked the alternator wires up wrong. I fixed them and hooked them up right and fixed the link. The car still wont start. When I turn the key over to start it the starter wont kick in and the lights in the dash shut off. The pressure gauge goes psycho. The power windows wont go down and when i turn the blinker on the lights on the dash start blinking along with the turn signal. Please give me some more suggestions. thanks.
 

·
Registered
Joined
·
201 Posts
Make sure you have a ground wire between the block and frame. I ran a heavy wire from the alternator frame to the car frame rail plus one from the rear of the cylinder head to the firewall.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top