ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
107,597 Posts
> I have had my Z in storage for about a year.
> It was running fine when it was parked, but
> now it has a problem. I won't rev over 3500
> rpm and it chokes and died if you give it to
> much gas. I pinched off the gas line to
> restrict the fuel flow and it runs smooth.
> I have checked the cold start valve, and
> there are is nothing blocking air flow to
> the engine.
> Does anyone know what would cause this???

Check for loose or corroded conections on the cylinder head temp. sensor. Tell if it works.

Will.
 

·
Registered
Joined
·
107,597 Posts
> I have had my Z in storage for about a year.
> It was running fine when it was parked, but
> now it has a problem. I won't rev over 3500
> rpm and it chokes and died if you give it to
> much gas. I pinched off the gas line to
> restrict the fuel flow and it runs smooth.
> I have checked the cold start valve, and
> there are is nothing blocking air flow to
> the engine.
> Does anyone know what would cause this???
Did you pinch off the supply line, or the return
line? It could be a fuel pressure regulator problem. Check to see what the fuel pressure is with an inline guage. Good luck, Joe
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top