ZCar Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
new to the forum. i have a 1976 280z 2t2 that i have been working on. The starter will not disengage after starting. I can unplug the wire going to the starter solenoid and it will disengage.i thought it would be the relay on the switch and replaced that now it wont start at all. Any help would be appreciated. thanks
 

·
Super Moderator
1983 280ZX Turbo
Joined
·
1,484 Posts
I'd check the relay and see if it's good. If you can't jump the contacts on the starter and get a response, it may be a bad solenoid on the starter.
 
1 - 2 of 2 Posts
Top