ZCar Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
13 Posts
is this an after market body kit that someone put on a 280z or are these full replacement panels on this car.? As for the idle I would check the adjustment of the chocke cables on the carbs or if its fuel injected the cols start valve.
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #4 ·
> Its a fiberglass body. SO its probally after
> market... Nice looking car.
A body such as this is available through VR engineering in Arizona. John Washington is the owner and it is called the Vello Rossa. (italian for fast red) As for the idle not settling down until the car warms if it is fuel injected that would be the air regulator on top of the intake. It is supposed to close when the car is warm, if it is closed when the car is cold the car will not idle correctly until warm. About $60.00 rebuilt through me plus core. A continuously spraying cold start would cause the car to belch black smoke and run poorly all of the time. One that didn't fire would make for long crank starts.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top