ZCar Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
664 Posts
Discussion Starter #1
Hi YaAll,
Replaced the igntion switch on my 75 today. I undid the cowling then took a wood chisel and hammer and made a slot into the 2 capped screws. This easily allowed me to use a flat head screw driver to unscrew the bolts. I then replaced the unit from my 77 parts car after a locksmith made me a new key to fit for just $18.
Use some lithium grease where the lock bolt on the ignition switch meets the column.
Ron
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top