ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter · #1 ·
just started replacing fuel vent hoses as per artical. the cat # of hoses in artical have changed and the replacements do not match my 72. the sizes are close but do not fit properly with out a lot of force. so far napa has had 3 of the 5 hoses and they do not carry to 5/8 rear passanger side hose nor the short one foot hose. if you are changing then, might as well go with motorsport. also i can get 4 out of 5 with out droping the tank. as in earlier post if you put a shim between the rear of the gas tank and the body skirt you have enough room to get to that hose. my problem has been the hose on the front of the tank from the gas tank to the vapor tank. might have to use local mech to change this one. i will need the car on a lift to get enough room to get to it. anyone have another idea. I have already taken the wheel off but that did not help
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top