ZCar Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 70-83 Tech Discussion Forum
    Hey friends, 72 240z and I'm looking to add a small fuse/relay box to handle my relays and looking to get some thoughts on this wiring for the fuel pump and starter. The idea is to use a later 280z/280zx 2pin oil pressure sender. After some searching I believe the sender is a normally closed...
  2. 70-83 Tech Discussion Forum
    I’m working on installing an aftermarket head unit in my 78 280z. I was going about identifying the wires, finding that solid blue was switched power, etc. after identifying the few basic wires it would take to at least turn the radio on, I marked up the wiring and plugged it in with no luck...
  3. 70-83 Tech Discussion Forum
    First post here, had my 78 280z for a couple weeks doing troubleshooting getting stuff figured out On Friday it was running on all 6 cylinders, a little rich so prob an injector issue. Last couple days I've been gutting the interior and moving wires around, and today it started up and ran...
  4. 70-83 Tech Discussion Forum
    Hi I own a 1977 280zI'm tired of fiddling with my turn signal stock so I'm just going to bypass it I have bought a three-way switch I have two possible places to place the switch inline. which wires would I have to connect to only operate the left indicator front and back and the right...
  5. 70-83 Tech Discussion Forum
    Folks, I have a 1983 280ZX Turbo Automatic, can anyone tell me what the green and white connector coming from the driver's side near ecu wires is for and where does it connect? Thanks!
  6. 70-83 Tech Discussion Forum
    Alrighty, Ive got a stock 1978 280z and I'm currently installing an MSD 6A and Blaster 2 coil into the car. After reading any and all forum posts on the topic I came to the conclusion that I would need an MSD Tach Adapter 8920 in order for the MSD box to Communicate to the EFI by upping it to...
1-6 of 6 Results