I have new steering rack bushings, but the steering wheel still cockz to the right on accel and then settles back to TDC when stopping. So the bushings were not the fix.

Tension rods are tight....have new adjustable upper control arms.

Any brainstorms?...no one has nailed this one in 4 years.

Removed the braided line and AN connectors today and went back to black. The fuel leak is fixed.

I also capped off the clutch booster hose with a bolt and clamp and my boost leak is gone. But my left leg will get such a workout that if I'm ever in a plane crash-landing in the Gobi Desert and try to walk out, I'll walk a straight line rather than a left-handed circle.

Can anyone name that tune?



Edited 1 time(s). Last edit was 2009:06:30:19:22:35.

Have you checked your tire rod's?

---

"Kandy has skill and vision"--Ballistic

2Jay-Z

Chances are, if your parents didn't have kids, you most likely won't either.

yup...tension rods are tight...alignment is right

oh...been selling polished fuel filters for years and finally mounted one to my car, plus black PC'd fuel filter bracket.

didn't go with the spdracer filter bracket?

---

'93 300ZXTT (black)
'03 Hummer H2 22`` chrome wheels with 37`` mud tires (daily driver)
Vancouver, BC

carztuff.com
stickerztuff.com
platinumrenos.ca


ZADDICT "Looks great, I am also interested in a "mini mount" ;)

I like it a lot, but I've had this one sitting around for years. I may still get Joe's bracket, but a polished "Z" fuel filter bracket won't show up much over a polished filter.

Does it return to center when you hit the brakes to stop or just rolling to a stop?

Check tire pressure in rear tires.

mega have you made sure your ball joints are good? Since we know how bad mine are, im thinking its what may be causing my varying pull, sometiems it pulls left sometimes right sometimes nothing (and no its not road crown it will do this on the same roads). juts a thought.

if not that, possibly the tie rod itself in the rack? But didnt you just replace the rack with a new one anyway?

---

I have Lived and Learned to LOVE... MY Z

zazupilot: you are luminar - slayer of Z's
1991zed: "i have a dual hks exhaust that gives me a good 30hp"
Ballistic: "A lime green Lambo with black wheels: The car of choice for the efeminate guy with the tramp stamp who wants to be a bada$$. Just say no to pillowbiting."
Ballistic: "Be sure to tell someone at your job that he's an idiot. Then stay away. Idiots self-destruct at any given moment."
YOU + ARE = YOU'RE. THEY + ARE = THEY'RE YOU ILLITERATE BASTARDS

It goes back to TDC while braking, not just stopping. Yup...new steering rack ($1200). All suspension parts are good, as I had the alignment shop check before ZDayZ when they dialed out some neg camber in the rear and aligned the front end.

I would think that one of your suspension links is shifting when braking due to a worn bearing/bushing/balljoint.

You can not always easily tell what is bad unless you remove the link from the car and inspect on a bench.

I think that Kandy was talking about steering tie rods not tension rods. You most likey replaced them with the new steering rack.

I have been doing a lot of research on tension rod end bearings. They can be worn out and give no indications when on the car. You can not grab a hold of the link and feel a looseness.

Sorry my post was of no real help. Trying to locate a bad suspension linkage is very fustrating. Esspecially when we have so many.

yep

If its @#$%& when you accel most likely it is something in the rear of the car as that is what is getting loaded when you accel.

Worn/busted subframe bushings, Worn control arm bushings ect.

---

1990 300ZX Twin Turbo
"Mr.DxD"
www.ZspeedPerformance.com

Subframe bushings are still stock lower control arms are still stock...hmmm....

I liked Joe's bracket, but the Z isn't cut right...lower-right edge isn't accurate. Beautiful piece, but still hoping he corrects some day, or I'll get a shop to fill it (weld-in) and repolish. Maybe I'm just picky.

---

1991 300zx Z32 Stage XX+ Twin Turbo 'ZINISTR'
1994 300zx Z32 Convertible 'BREEZZY'
1993 300zx Z32 Convertible TT (Work-in-progress - to be named)
2009 NISMO Edition 370Z, Silver - #196
--------------------------------------------------------------------------------------------------------------
The 2010 Menu of Adventures:

- Curly Baztard "Ohio TOTD Cousin" Driving Weekends (Spring/Fall dates TBD)
- Branson Z Fest - June 4-6, Branson, Missouri - www.bransonzfest.com
- Midwest Z Heritage Regionals - June 25-27, Cleveland - www.clevelandrockz.com
- 40th Anniversary of the Z! ZCCA Convention July 28-Aug. 1 - www.zcon2010.com
- RoadGodZ.com Gathering - August 27-29 - Rapid City, SD - roadgodz.com
--------------------------------------------------------------------------------------------------------------

zinistr Wrote:
-------------------------------------------------------
> I liked Joe's bracket, but the Z isn't cut
> right...lower-right edge isn't accurate.
> Beautiful piece, but still hoping he corrects some
> day, or I'll get a shop to fill it (weld-in) and
> repolish. Maybe I'm just picky.


You are the only person that ever noticed that ;)
I just now, after staring at it for 20 mintues figured out what you were taling about...

On the next run I will have the that little inconsistancy fixed and send you a new one

---

1990 300ZX Twin Turbo
"Mr.DxD"
www.ZspeedPerformance.com

"Maybe I'm just picky" LOL

said the original picky bastard