Continuing my other topic regarding replacement of front end steering parts -

I noticed that the ends of the cross rod in my car are also pretty worn. It doesn't appear that they are the screw in type like the outer tie rods. Is there any replacement for just those ends?

Black Dragon has the entire center rod for 275$ (ouch!) MSA has the same part for 218$ (still ouch!)

Any ideas folks? It'd seem pointless to replace everything else and still have those two joints being bad.

---

81 280ZX - getting there

What the heck are cross rod joints? Do you mean ball joints? Steering linkeages? What?

---

Edmonton, Alberta, Canada.
My main areas of knowledge involve the ZX.

Grammar Saves Lives! IE: Lets eat Grampa or Lets eat, Grampa.

This thing chief. Has two joints on it.



The part numbered 6

---

81 280ZX - getting there



Edited 1 time(s). Last edit was 2009:01:03:07:26:08.

I think he means inner tie rods. Check the price of a reman steering rack. It was cheaper to buy a rack for the 78 than 2 inner tie rods. The rack was slightly more than 1/2 what inners would cost. Check several of the chains as price varied. FYI, A-1Cardone (crap shoot but mine worked.)

Cross rod is the correct term and its for a power steering S130, not a S30 with a rack. Unless you're willing to do some machining, you need to buy the complete cross rod.

---

-----
John Coffey
[www.betamotorsports.com]

Thanks John. That's what I was worried about.

---

81 280ZX - getting there

Junkmam, look at that drawing that Attworth pulled from his FSM again. Where do you see a "Steering rack", because I don't see one and that steering system was used from 6/78 to 8/81.

To Attworth, the end joints on the "Cross rod" are not replaceable and you have to buy the whole thing.

The part # is 48560-P7125 and the list price from Nissan is $220.42. I went to [www.nissanparts.cc], which is a Nissan dealership in Washingon state and they sell it for $167.96 + $20.15 shipping. That means the total cost from "nissanpart.cc" is $188.11 and that gives you a savings of $29.89 over MSA.

---

1983 280ZX currently in restoration.
1982 280ZX parts car for 83', now crushed.
1984 300ZX turbo Rolled one rainy spring day, twisted body, sold parts & crushed.

Service manuals for Z cars and Nissan Factory Parts Program FAST:
240Z, 260Z, 280Z [www.xenons30.com]
280ZX [www.xenons130.com]
Z31 300ZX [www.xenonz31.com]
Z32 300ZX [www.xenonz32.com] No 91', 92' or 93', help him out OK.
350Z and G35 [www.xenonz33.com]
370Z and Fairlady [www.xenonz34.com]

VVVVVVVVVVV

---

_______________________________________________
Me Y0RGO...You Not



Edited 1 time(s). Last edit was 2009:01:03:10:28:26.

Joint
John Cross, Rod Birley

---

_______________________________________________
Me Y0RGO...You Not

YORGO- That last photo is just wrong! A joint that size would lose mor smoke to the air than you could possibly inhale. That would mean wasting over 3/4ths of the joint.And we all know "waste not want not"! Those kids need to break that one up into 50 fair sized ones and pass them out . And who in that state of mind has the concentration to lick and glue all those papers together to make that monster!!

Miss PuffPuff doesn't know she's smoking a cow pie joint. Her blondie friend just realized it after her toke.

---

-----
John Coffey
[www.betamotorsports.com]

Pretty sure attworth called easyguy71 chief... oh snap!

yeah, I caught that with my blackfoot tribe eye. I brag about being half French. The other half is Native.

Didn't realize he had that setup of steering system. I've got rack and pinion and the setup is completely different. Used to have power steering but removed it.

---

Edmonton, Alberta, Canada.
My main areas of knowledge involve the ZX.

Grammar Saves Lives! IE: Lets eat Grampa or Lets eat, Grampa.



Edited 1 time(s). Last edit was 2009:01:03:20:31:15.

Easyguy71 Wrote:
-------------------------------------------------------
> yeah, I caught that with my blackfoot tribe eye. I
> brag about being half French. The other half is
> Native.
HOW!
Medium Rare...

---

_______________________________________________
Me Y0RGO...You Not

I'm also part Blackfoot, only about 1/32nd though.

---

81 280ZX - getting there

Yorgo, I'd tell you how, but the mods aren't allowing any pictures that may not be safe for the kiddies, remember? Anyhow, let's just say it involves sex.... Keep reading, buddy. You'll find some pics out there!

Attworth, what end of the world are you in? I know in Canada, the Blackfoot roamed from the Rockies in Alberta east to the shores of Lake Ontario. If you're in the US, how far south did they make it?

---

Edmonton, Alberta, Canada.
My main areas of knowledge involve the ZX.

Grammar Saves Lives! IE: Lets eat Grampa or Lets eat, Grampa.

I`m part Blackfoot too, not sure how much though. I`m originally from Boston, my mothers side of the family is from Canada, so I`d guess we were from the eastern Blackfoot tribes.

Maybe we have enough to start a Blackfoot Z club?

---

Richardson, TX

"I`ve tried nothing and I`m all out of ideas"

shifting and drifting...
mechanical music....
adrenaline surge!!!!


1977 280Z R.I.P. 6/9/96
1977 280Z stock with custom rust



Edited 1 time(s). Last edit was 2009:01:04:13:58:59.

I was born (along with the rest of my family,) in Wisconsin. I'm in Texas now though.

---

81 280ZX - getting there

Just an update for anybody with the crappy steering setup known as reciprocating ball - Courtesy Parts does not carry the cross rod. Although they can order it from Japan for 190$ and take 4-8 weeks to deliver. I think I'll be ordering it from Canada or MSA.

---

81 280ZX - getting there